Every machine passes a 140-point inspection before it’s yours

Hours recorded and verified, hydraulics tested under pressure and undercarriage wear measured as a percentage — not guessed at.

Excavator inspected across hydraulics, undercarriage and structure
Peace of mind, built in

Hours and hydraulics, measured

On a machine, hours are the price. So we record the meter reading and verify it as part of the inspection — along with the idle-to-working hours ratio that tells you how hard it actually worked.

Then we test the parts that cost real money: pump flow and pressure against specification, cylinder drift under load, and undercarriage wear measured as a percentage of life remaining.

  • Hours recorded and verified — meter reading documented as part of the pre-delivery inspection.
  • Hydraulics pressure-tested — pump flow, relief settings and cylinder drift measured, not eyeballed.
  • Undercarriage measured — chain, sprockets, idlers and rollers reported as percentage of wear.
View the inspection report
140
points inspected
13
inspection areas
100%
hours recorded & verified
90
day limited warranty
What we inspect

All 140 points, grouped into 13 areas

Big things and small — checked, measured and recorded before anything is cleared for delivery.

Identity & documents

Year, make, model, PIN / serial, hours

Diagnostics & machine history

Fault codes, hours history, regen data

Cold start & engine

Blow-by, smoke, turbo, oil

Fuel system & emissions

Filters, injectors, DPF, DEF

Cooling system

Radiator, oil cooler, fan drive

Work equipment & attachments

Boom, arm, bucket, coupler

Hydraulic system

Pump flow, pressure, drift, oil

Drivetrain, travel & brakes

Travel, swing, tracking, brakes

Undercarriage, running gear & frame

Tracks or tires, rollers, frame

Electrical & battery

Load test, harness, lights

Operator station & safety

ROPS/FOPS, belts, lockout

Fluid analysis & lubrication / greasing

Samples, grease points, levels

Final service & delivery preparation

Work-test, wash-down, QC sign-off

On the work test alone

We don’t just look — we work it

A sample of the checks behind every “cleared for delivery” result.

Cold start without starting aids
Crankcase blow-by under load
Pump flow & pressure to spec
Cylinder drift held under load
Cycle times against specification
Swing drift on a grade
Track chain wear percentage
Final drive noise & play
Full ECM fault-code scan
90-day limited warranty

Covered well beyond delivery day

Every purchase includes a 90-day limited warranty on major mechanical components, at no extra cost.

90 days or 200 hours, whichever comes first

Engine

Internal lubricated parts, pistons, crankshaft, camshaft, timing chain, cylinder head and block.

Hydraulic pump

Main and pilot pumps, including internal wear beyond specification.

Cylinders & valve

Boom, arm and bucket cylinders, plus the main control valve.

Swing system

Swing motor, swing gearbox and the slew bearing.

Final drives

Final drives and travel motors on tracked machines.

Powertrain

Transmission, axles and differentials on wheeled machines.

Specific to Heavy Equipment

  • Undercarriage — tracks, rollers, idlers, sprockets and track tension components.
  • Ground-engaging tools — buckets, blades, teeth, cutting edges and attachments.
  • Normal wear from use — components worn within their expected service life at the machine’s hours.
Good to know

What a warranty doesn't cover

A warranty protects against mechanical defects — not everyday running costs or accidental damage. The following are normally your responsibility, on every category we sell:

  • Routine maintenance — oil changes, fluids, filters and scheduled servicing.
  • Wear-and-tear items — tires, wheels, alignment, brakes, wipers, belts and hoses.
  • Accident & environmental damage — collisions, hail, flood (that’s what insurance is for).
  • Cosmetic conditions — paint, glass, trim and upholstery.
  • Infotainment & electronics — navigation, audio, entertainment and communication systems.
  • Aftermarket & add-ons — non-factory equipment and added electrical accessories.
  • Exhaust & emissions components — catalytic converters, sensors and exhaust parts.
  • Air conditioning recharge — topping up refrigerant is a service item, not a defect.
  • Pre-existing conditions — anything we disclosed to you in writing before the sale.
  • Neglect or misuse — skipped maintenance, overheating, racing or unauthorized repairs.

How to make a claim

  • Stop using it as soon as you notice a problem, so a small fault doesn’t become a big one.
  • Tell us in writing within 3 business days of spotting it.
  • Wait for our written approval before any repair begins — work done without it isn’t covered, even if the part is.

Always protected first

Everything we sell still ships with the 90-day limited warranty and a 30-day money-back guarantee — so you're covered from day one.

Buy on measured condition

Browse machines with hours recorded and verified, tested hydraulics and undercarriage wear on record.